xcadmin, Author at Xcentric Mold & Engineering

Author: xcadmin

Learn More About Xcentric Mold & Engineering

April 9, 2018

We’ve seen a need out there for the product developers to help get their parts to market quickly…where our specialty is helping the customer get through the prototype stage and ramping them into production. Hi, I’m Brendan Weaver from Xcentric Mold & Engineering and we specialize in Real Fast Custom Parts. What does Xcentric do? […]

Read More

Resolved to Be a Better Design Engineer in 2018

March 3, 2018

Utilizing our Advanced Mold Making System and Proprietary Process Engine will allow you to add design features you thought weren’t possible and receive parts faster than you thought was probable. If you are ready, we can provide a quote on your latest project within hours.  Get a Quote We’d love to hear about your latest […]

Read More

Learn More About Injection Molding with These Animations

February 10, 2018

You’ve likely read about and understand injection molding (if you haven’t, go here).  But there may be some terminology that you just need to visualize.  Watch what insert molding, overmolding and undercuts are all about and how you can utilize these injection molding features to help with your part design. What is an Undercut? What […]

Read More

The Difference Between Moldability and Manufacturability

January 24, 2018

The difference between moldability and manufacturability may seem subtle, but the reality is that understanding it better can have an impact on your part development. What is Moldability? Moldability refers to how well the mold of your part will conform to being injected with molten plastic. Once your mold has been created from your design, a good injection […]

Read More

3 Advantages of a Fast Development Cycle

December 17, 2017

Three Advantages of a fast development cycle. Product Sales Life Cycle – A product introduced sooner does not become obsolete sooner, instead it prolongs the sales life cycle. Generally, for every month added to the front of the sales (getting product to market), it will add a month of sales life to the back. Increased […]

Read More

3 Types of Manufacturers and Why it’s Critical to Select the Right One

December 2, 2017

Choosing a competent vendor to help you produce your part is a critical step for the success of your project.  Let’s examine some of the different types of vendors currently available to source from. Conventional Manufacturing Conventional manufacturing is Unless your design is highly niched, extra large in size or requires more than 100,000 parts run at […]

Read More

Material Selection – A Primer for Injection Molding

November 15, 2017

Your choice of material becomes more critical the closer you are to production. The same material used in each of the manufacturing process will produce different results. For instance, a part 3D printed in ABS will have very different strength and finish properties compared to a part machined via CNC. This is due to the process being […]

Read More

Designing for Manufacturability

October 21, 2017

Some things to consider moving forward toward manufacturing is the time and effort put into designing your part for manufacturability. As your project makes its way through the progression of its development, your original model may need to be altered to fit the manufacturing process. As we have shown, each process has different accuracy and resolution […]

Read More

White Paper: The Smart Guide to Designing for Manufacturability

October 1, 2017

Learn how to take advantage of our Advanced Mold Making System and Proprietary Process Engine to design better parts. Not all mold makers are the same. Follow the guide of the most advanced. Go here for your FREE download!

Read More

Xcentric Mold vs. 3D Printed Mold

September 10, 2017

How do 3D printing molds match-up against Xcentric’s Advanced Mold Making and Proprietary Process Engine? 3D printing has come a long way in recent years.  According to IBIS World, it is currently a $492.4 million market and is expected to grow by 80% over the next five years.  This sort of growth will open up […]

Read More